1" deep 324 square feet

2" deep 162 square feet

3" deep 108 square feet

4" deep 81 square feet

5" deep 64 square feet

6" deep 54 square feet

1.) Measure- Measure the sides of your area

2.) Convert all of your measurements to feet

If you measured in feet skip to "Calculate the Area as Square Footage"

If you measured in feet & inches, divide inches by 12 and add that to your feet measure to get total feet

If you measured in another unit of measure, do the following to convert to feet

- inches: divide by 12 and that is your measurement in feet

- yards: multiply by 3 and that is your measurement in feet

- centimeters: multiply by 0.03281 to convert to feet

- meters: multiply by 3.281 to convert to feet

3.) Calculate the Area as Square Footage

If you are measuring a square or rectangle area, multiply length times width; Length x Width = Area.

For other area shapes, see formulas below to calculate Area (ft2) = Square Footage.

4.) Convert among square inch, square foot, square yard and square meter

You could, for example, perform all of your measurements in inches or centimeters, calculate area in

square inches or square centimeters then convert your final answer to the unit you need such as square feet or

square meters.

To convert among square feet, yards and meters use the following conversion factors. For other units use our calculator for area conversions.

Square Feet to Square Yards - multiply ft2 by 0.11111 to get yd2

Square Feet to Square Meters - multiply ft2 by 0.092903 to get m2

Square Yards to Square Feet - multiply yd2 by 9 to get ft2

Square Yards to Square Meters - multiply yd2 by 0.836127 to get m2

Square Meters to Square Feet - multiply m2 by 10.7639 to get ft2

Square Meters to Square Yards - multiply m2 by 1.19599 to get yd2

CALL US (610)562-8662

(610)562-8662

info@aradamandson.com

`Copyright © Danelle Koch. All rights reserved.`

4 Industrial Dr Hamburg PA 19526

Get Directions »